The right membrane filtration unit for your laboratory:
MiniMem – MidiMem - MaxiMem

PS Prozesstechnik GmbH constructs the right membrane filtration unit for your application. We do build taylor made membrane units but over many years of experience also with our own test units we have selected 3 "standard" units presented here: MiniMem – MidiMem - MaxiMem. They differ mainly in the minimum working volume and membrane area. They are versatile in the type of process and membrane used: reverse osmosis, nanofiltration, ultrafiltration and microfiltration. Depending on the system it includes stirring of the feed vessel and electronic level control for automated diafiltration. Pressure and temperature are electronically indicated and optionally recorded. All units can be termperature controlled.

smallest membrane filtration unit - MiniMem

The smallest automated membrane filtration unit

MiniMem

membrane filtration unit - MidiMem

Automated membrane filtration unit for flat membranes

MidiMem

 

big laboratory membrane filtration unit - MaxiMem

The big laboratory membrane filtration unit

MaxiMem

Differences:

MiniMem
MidiMem
MaxiMem
minimum working volume
10 / 30 ml 80 ml
200 ml
feed vessel
30 / 100 ml 500 ml 5000 ml
membrane area
5 / 28 cm2 200 cm2 200 / 3000 cm2
typical permeate flux
0.25 / 1.4 ml/min 10 ml/min 10 / 150 ml/min

Operating pressure of all units 1-40 bar (higher on request). We adapt the units to fulfill special requirements of your application.

Overview: MiniMem - MidiMem - MaxiMem pdf